Home » Home Improvement

Category Archives: Home Improvement

How to Choose the Right Window Replacement for Your Home

Window Replacement Fort Worth TX is a major investment, so homeowners need to consider everything from materials and features to warranties and installation. Homeowners should look for companies that offer a variety of window styles and customization options.

A wide range of choices will give homeowners more opportunity to find a solution that seamlessly aligns with their vision.

If you have a window that is difficult to open and close, it may be time for sash replacement. A broken or improperly functioning window sash can lead to draftiness, moisture, and a loss of overall home energy efficiency. Fortunately, homeowners don’t have to front the cost of a full window replacement to address the problem. Instead, sash replacement kits are available that can be purchased at most hardware stores or online from a window supplier.

The most important thing to do before beginning a new sash installation project is to take precise measurements of the current window opening. Start with the inside edge of one window side jamb, and measure straight across to the opposite jamb. Repeat the measurement on the sill, and on the head jamb (where the bottom sash rests when it is closed). You will need to know these measurements in order to purchase the correct sized window sash replacement kit.

A sash replacement kit includes all the necessary parts and accessories to replace an existing window sash with minimal impact on the frame and trim pieces. The kits include a pine upper sash and lower sash, a foam head jamb filler and weather strip flange, a pair of vinyl concealed sash jamb liners, balance hardware, common and finishing nails, and wood head parting stops. You can find these sash replacement kits at most large box hardware stores, though they are also available from a number of online window providers.

Once you have the new window sashes in place, nail the head parting stop to each end of the sash frame to secure it. Then, line up the pivot pins on the bottom of the sash with the clutch within the jamb liner. Once the sash is properly in place, it’s just a matter of pushing on the top half of the sash to install it into the clip within the jamb liner.

Older sash windows were often made of wood, and they can swell or shrink as humidity levels change. This can make them difficult to open and close, or cause the sash to become stuck in its frame. Some older sash windows even contained multiple panes of glass held together with grilles, and deterioration of the grilles can prevent them from holding the glass in place.

Replacement Glass

If your windows are old, broken, or single-glazed, replacing the glass can make a huge difference in both the way your home looks and the way it functions. The right choice will increase comfort, reduce draftiness, and lower your energy bills — not to mention enhance curb appeal and value.

Many people think of glass as just a clear material that lets light in, but there’s much more to it than that. Glass is also a component of the window frame that holds the panes together and supports them. It can be tinted, frosted, patterned, or colored to suit your style and taste. It’s even available in a variety of thicknesses to suit your needs, so be sure to discuss your options with a glass specialist.

A professional glazier will be able to repair or replace the glass in any type of window or door. To replace glass in a window, first remove the moveable part of the sash from the frame using a screwdriver or pry bar. If the sash is still attached to the frame, use a putty knife or razor blade to cut through any caulking around the frames and trim. Once the sash is removed, carefully break up any shattered or cracked pieces and bind them with tape to prevent injury or cleanup. Next, carefully remove the old windowpane from the frame and set it aside. Finally, clean the old window frame and remove any paint, foam, or caulking that may be stuck to it.

Then, it’s time to measure the size of your window opening and order a new pane. Be sure to take horizontal and vertical measurements, as well as the width and weight of your old pane. A good rule of thumb is to subtract 1/8 inch from all sides when measuring, as this will allow you to get the most precise measurement for your replacement window.

Once your new replacement window is ready, a glass professional can install it by applying silicone sealant to the edges of the new pane. This will help to hold it in place and create a weather-resistant seal that will help to keep moisture out of the frame. In addition, a low-E film can be added to the replacement glass that bounces sunlight back outside during the summer and helps it stay in during the winter, further lowering your energy costs.

Replacement Frames

Many homeowners focus only on the style and glass of their replacement windows, but determining what type of frame to choose is also important. The choice can impact the window’s energy efficiency, durability and long-term cost.

There are a variety of different frame materials to choose from, including wood, vinyl aluminum and composite plastic. Each type offers its own unique advantages. For example, wood is naturally insulating and can be stained or painted to match the home’s interior design. However, it may require more frequent maintenance than other materials. Aluminum frames, on the other hand, are lightweight and can withstand a range of temperatures. But they do not insulate as well as other frame materials, and they tend to dent easily.

A popular option is a composite frame, which combines wood and another material such as fiberglass or vinyl. This allows you to enjoy the appearance of wood without the higher maintenance costs, while boosting the energy efficiency of your home. Many companies offer composite frame options in various colors, so you can find the perfect match for your home’s exterior design.

Insert replacement is a less invasive installation method that involves installing the new window into the existing frame opening. It is an ideal option if you want to update your windows but are limited by the size and style of your existing frame opening. This type of install limits disturbance to the exterior and interior trim, but it is not as insulating as full-frame replacement.

In full-frame replacement, the existing frame and trim are removed and replaced with a new frame and sash. This allows you to change the size and shape of your window opening, which can be particularly useful if you want to replace an inefficient double-hung window with an easy-to-open awning window over your sink or improve ventilation in a small room like a bathroom. This type of install requires more work and carries a larger upfront cost, but it can maximize your energy savings over time.

Replacement Hardware

The window hardware that supports a sash can become worn out or damaged over time. This can lead to leaks or air gaps that allow cold outside air into the house. A contractor can replace the hardware and restore your windows to their original state of functionality. The contractor will also be prepared to correct any problems that are caused by improper installation, such as moisture seepage or rotting.

A window replacement can improve a home’s appearance and energy efficiency. However, it’s important to understand the differences between a repair and a full replacement before making a decision.

It’s also a good idea to check whether or not your existing window is covered by a warranty and determine if you have an available timeframe for getting repairs done. Depending on the window type and the severity of the damage, it may take 6 to 12 weeks for custom-ordered replacements to arrive from the manufacturer.

When choosing a replacement, look for a product that’s Energy Star certified. The EPA estimates that upgrading your windows to Energy Star standards can save you between 12 and 13 percent on energy costs.

If you’re thinking about replacing your windows, it’s a good idea to consider using a composite material like Fibrex, which is a combination of wood and vinyl. It’s more durable than traditional vinyl and has a more natural appearance. Some companies, such as Renewal by Andersen, offer this option along with their traditional vinyl products.

If you choose to replace your windows with a new, Energy Star-certified model, you’ll need to prepare the area around the window for proper installation. If there are cracks or holes in the surrounding frame, siding or sill, these will need to be repaired prior to installing the new window. Additionally, you’ll need to ensure the rough opening is square and level for the new window. If it’s not, the window won’t open and close properly, leading to potential damage to the sash and surrounding areas. A contractor can help with this preparation and can also recommend an appropriate sealant for the job.